Suzhou Tianxuan Seiko Technology can carry out material cutting based on production demands. For some small parts, they can be processed by routing or CNC machining. When manufacturing containers, Suzhou Tianxuan Seiko Technology needs to use a cutting press for material cutting, followed by welding, sandblasting, and painting. After these processes, the parts are completed. It should be noted that for small parts, after grinding, the surface needs to be electroplated or painted. Suzhou Tianxuan Seiko Technology often undertakes batch processing of parts, so the manufacturing methods, cycles, and operation norms and processes are different from those of general product processing. Next, Suzhou Tianxuan Seiko Technology will introduce the processing techniques and operation norms of Suzhou Tianxuan Precision Technology.

Suzhou Tianxuan Seiko Technology Processing Technology:

The processing technology route has a great deal of uncertainty. One component or product can have multiple processes, and the types of machinery and equipment and tooling fixtures required for the production process are numerous.

2. In the hardware manufacturing industry, enterprises mainly engage in fragmented processing. The quality and output rate of products largely depend on the technical proficiency of workers, while the degree of automation is mainly at the unit level, such as CNC machine tools and flexible manufacturing systems.

3. The components of the products are generally made through a combination of in-house production and outsourcing. For instance, special processes such as electroplating, sandblasting, oxidation, silk-screening, and laser engraving are usually outsourced to external manufacturers for processing.

4. There are many parts required, and in the workshop, a lot of material requisition forms often need to be filled out. One can also see production orders lined up in a "straight line". If there is process management, many process transfer forms also need to be filled out.

Suzhou Tianxuan Seiko Technology Processing Operation Specifications:

When processing products, operators should maintain the correct posture and have sufficient energy to handle the work. If they feel unwell, for personal safety, they must immediately leave the work position and report to the workshop supervisor or a higher-level leader. During operation, they must concentrate and avoid chatting. They should cooperate with each other. Operators must not operate in a state of irritability or fatigue. For personal safety and to prevent accidents, ensure operational safety. All employees should check their attire before entering the work position to ensure it meets the work requirements. It is strictly forbidden to wear slippers, high heels or clothing that affects safety. Those with long hair should wear safety helmets.

2. Before mechanical operation, check whether the moving parts have been lubricated with oil. Then start the machine and check whether the clutch and brake are normal. Let the machine idle for 1 to 3 minutes. Do not operate the machine if there is any malfunction.

When changing the die, the power supply must be turned off first. Only after the movement part of the press stops running can the installation and adjustment of the die begin. After the installation and adjustment are completed, move the flywheel by hand to test the punching twice. To prevent unnecessary collisions between the machine and the product to be processed, it is necessary to check whether the upper and lower dies are symmetrical and reasonable, whether the screws are tight, and whether the blank holder is in a reasonable position.

It is necessary to wait until all other personnel have completely left the mechanical operation area and removed all debris from the workbench before turning on the power to start the machine.

5. When operating machinery, it is strictly prohibited to insert hands into the slider operation area or to take or place workpieces by hand. When taking or placing workpieces in the die, tools that meet the standards must be used. If abnormal sounds or malfunctions are detected in the machinery, the power switch should be immediately turned off for inspection. After the machinery is started, only one person should handle the material and operate the machinery. Others are not allowed to press the electrical button or step on the foot switch panel. For the safety of others, it is even more forbidden to insert hands into the machinery operation area or touch the moving parts of the machinery with hands.

The above is a detailed introduction to the processing techniques and operation norms of Suzhou Tianxuan Seiko Technology. The small hardware products made by Suzhou Tianxuan Seiko Technology are not ultimately consumer goods, but rather supporting products for industrial manufacturing, and some are semi-finished products. Only a small portion of Suzhou Tianxuan Seiko Technology's products are consumer goods such as screws, screwdrivers, wrenches, fishing gear, etc. Suzhou Tianxuan Seiko Technology's accessories are machine parts or components made by Suzhou Tianxuan Seiko Technology, or some small hardware products that can be used independently or as auxiliary tools.